기기를 수리하세요 커뮤니티 상점

2016년 9월 16일 출시. Model 1660, 1778. GSM 또는 CDMA / 32, 128 또는 256 GB / 로즈 골드, 금색, 은색, 검정색, 칠흑색으로 제공됩니다.

2264 질문 전체 보기

옵션

I attempted a screen repair

Hey guys this is my first visit post on the forum.

Im looking into buying faulty tech & refurbishing for profit so I’m sure I will be back many more times.

I attempted a screen repair on my iPhone 7 which I dropped a couple of months back, it had a few cracks on it. I tried taking the screen off with a heat gun, i couldn’t take it up & got frustrated & ended up trying to pry it up through a hole next to the home button. Think I goosed the LCD up even more lol ???.

ive got an LCD digitiser screen to replace it with would it still do the trick when I attempt it again?

Many thanks

Rob

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

Ok thanks for your response bud much appreciated I’ll post back when I’ve had a go at it ???.

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

The iPhone 7 is not a difficult phone to open if you do it properly. First off I hope you removed the two Pentalobe screws at the bottom of the phone. When applying heat with a heat gun make sure to keep some distance as those things can get very hot! The phone should just be a bit hotter then it’s comfortable to hold. Start by heating at the bottom edge where the home button is and use a suction cup to get a pick under the screen and cut through the adhesive.

Follow the screen replacement guide carefully to do this properly. You only seem to have damaged the screen even further, but should still be replaceable.

PS: Try to be well rested and calm, as you’ll easily damage components beyond repair if you’re frustrated.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

귀하의 답변을 추가하세요

Robert Evans 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 35