주요 콘텐츠로 건너뛰기

모델 A1297 Unibody: 2009 상반기, 2009 중반기, 2010 중반기, 2011 상반기 & 2011 하반기

529 질문 전체 보기

Broken pin in battery connector on logic board

I wonder if anyone can help me with this please ? After having some difficulty in getting a replacement battery for my Macbook Pro to fit in the internal jack on the motherboard, I found that one of the pins was bent (the 2nd one from the left as you look at in to it from the battery side), and later broke off when I tried to straighten it with a plastic spudger. My MBP still recognises and charges the battery though, so was wondering if anyone can tell me what this PIN was for, and if it’s ok to keep running my laptop with it missing, or if it will affect battery performance ? Any advice would be gratefully appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 해법

The 3 first pins in the socket carries power to/from the battery and are on the same circuit. Other pins are for data lines and ground so you’ll be OK with only two power pins. Just make sure that the broken pin don’t short the data pin cause you would inject 12v in a 3.42v circuit. Not good…

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Thank you so much for your reply. To say I'm relieved is an understatement !

댓글 달기

귀하의 답변을 추가하세요

Stuart 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 9

전체 시간: 63