Not responding to touch after screen replacement

Question

iPhone XS

2018년 9월 21일 출시. Models A1920, A2097, A2098, A2100. GSM 또는 CDMA / eSIM 또는 nano-SIM / 64, 256, 또는 512GB / 은색, 금색 또는 스페이스 그레이. ("iPhone 10 S"로 발음합니다.)

398 질문 전체 보기

Brianna Valenzuela @brianna15

평판: 25

1

게시일: 2021년 7월 8일

옵션

Not responding to touch after screen replacement

I replaced an iPhone XS screen because it was cracked and it was ghost touching. Also replaced the battery because it wasn’t charging. The phone charges now so the battery replacement seems to be a success, but I’m having issues with the display. It turns on fine and the picture looks fine but it doesn’t respond to touch whatsoever. I have checked the connection multiple times and they all are connected properly but nothing I do is working. I have tried force resetting as well and they didn’t do anything.

I’ve replaced iPhone screens before (including an IPhone XS) but I’m still an amateur so I have no idea what else could possibly be wrong with it.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 2

댓글 2개

Thanks for your answers! I emailed the company and they said they’d replace it. I’ll update if the new one works

Brianna Valenzuela 의 2021년 7월 8일

This happened to me today. Replaced an iPhone XS with a new screen from iFixit. Apple told me to do a hard reset. That fixed the problem. I think this is common and hopefully iFixit will update their repair instructions.

Matt Schor 의 2022년 1월 18일

댓글 달기

답변 2개

선택된 답변

Chris Stables @imicrosoldering

평판: 50.7k

8

14

101

게시일: 2021년 7월 8일

옵션

You will need to rule out the screen as it may be faulty. If the screen is not the problem it will be a logic board problem.

The touch power and data lines are on the bottom layer of the board and are connected to the top half of the board through solder balls. If the phone has been dropped in the past it could have caused one or more solder balls to crack.

To diagnose your problem once you have determined it’s not the screen would be to take measurements of the connector pins with a multimeter and check against the board view schematics.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

thisneeds pix

The Program 의 2023년 3월 5일

댓글 달기

Thanks for your answers! I emailed the company and they said they’d replace it. I’ll update if the new one works — Brianna Valenzuela
This happened to me today. Replaced an iPhone XS with a new screen from iFixit. Apple told me to do a hard reset. That fixed the problem. I think this is common and hopefully iFixit will update their repair instructions. — Matt Schor