주요 콘텐츠로 건너뛰기

모델 A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, 또는 2.4 GHz Core 2 Duo 프로세서

1203 질문 전체 보기

MacBook only boots without battery installed

Fitted a new battery and macbook powered on fine. however I did not notice that it was not charging until it became flat.

On investigation I found that the MagSafe connector on the laptop had shorted.

I fitted a new one but the laptop will not boot with the battery installed.

I can boot without the battery and every thing is fine.

My question is how can I revive this new battery? The test button on the battery shows one green led lit.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

You’ll need to do some sleuthing!

You likely have a burn’t MOSFET within the charging logic so power is not getting to the battery. Are you knowledgeable on how to read a schematic and use of a DVM? If you are you’ll need to find the schematic and boardview drawings of the main logic board to probe the power rails and test the MOSFET’s.

Your other opton is just replace the logic board MacBook Core 2 Duo Logic Board Replacement

Now the hard question! Is it worth the investment?

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Thanks for your prompt answer.

I am ok with DVM and circuits but as you say is it worth it to replace Mobo?

I will look at prices and make a decision

댓글 달기

귀하의 답변을 추가하세요

Peter Rowe 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 2

전체 시간: 58