옵션

Ghosting only on blacks, colors are okay

My Canon Pixma MX922 has a print ghosting problem only on the two black inks. Colors look good. Canon recommends cleaning the encoder/timing strip with IPA. I have done this multiple times with no performance change. Any ideas what the cause could be? Would a bad print head do this? Do I need to disassemble the printer to access and clean the encoder/timing read sensor?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 1개

Hi @damon10 ,

Just curious if it does this when printing or scanning using the printer control panel or from a computer or both?

jayeff 의 2022년 3월 11일

댓글 달기

게시일: 2022년 3월 10일

옵션

@damon10 yes, a partially clogged print head could be the issue. Check on here how to clean it

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

I did throughly clean the print head. It did not fix the issue. I can try that again. It just wastes ink that has flowed from the ink cartridges into the reservoir of the print head. A few other people posted this same issue on Canon’s support sight. Canon’s response was clean the timing strip, which didn’t fit it for us.

DTG 의 2022년 3월 11일

댓글 달기

Canon PIXMA MX922

Ghosting only on blacks, colors are okay

답변 1개

귀하의 답변을 추가하세요