기기를 수리하세요 커뮤니티 상점

Repair guides and disassembly information for the MacBook Pro 16'' released in November of 2019. Model A2141, EMC 3347.

211 질문 전체 보기

옵션

No power after screen replacement. Please help me find this part!

Block Image

I replaced the screen on a 16” 2019 model, and the last thing I had to do was connect the battery cable to the (7 pin ribbon cable connection on the logic board I believe) and the “pressure” clip broke off so I think that might be the problem. No connection? Where can I find this replacement part?

UPDATE:

Had a buddy microsolder a new one on, and it booted for one second then shut off and now no response. Any ideas? Could it be a bad connection? Or did we just fry the logic board?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

You don’t need to replace the full connector, just the latch part. I would try to find it as it can be put back as it’s not uncommon to snap off.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

cole Wengender the connector is a Fujikura/DDK FF14A-6C-R11DL-B-3H. You can get it on some places as a single item, others require you to buy at least 10. Do an online search with that number and see what will work for you. Then get yourself a few of those and gently lever one side, then the next side of the lock out of the connector. Transplant that lock to your connector.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

cole Wengender 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 9

전체 시간: 90