기기를 수리하세요 커뮤니티 상점

An audio/video receiver (AVR or home audio receiver) is a consumer electronics component used in home theaters that convert signals into sound.

280 질문 전체 보기

옵션

Denon receiver HDCP error? Denon AVR-X2700H

So.... I'll do my best to explain this.

Like roughly 2 years ago, I had gotten a new home theater system, And When watching movies it goes black with no sound then in like 15 seconds it comes back. I think it's the Roku not communicating with the receiver with HDCP, This theoretically shouldn't be happening. All the cables are compatible with HDCP

Example:

Block Image



I'm using:

TV: Sony XBR-558H
Receiver: Denon AVR-X2700H
Roku: Roku Ultra

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 2개

@beanman56 The signal from the Roku displays okay on menus, correct?

의

Yep. But some times it just in the middle of movies so blank.

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hi @beanman56

Have you checked that the Sony firmware, the Denon firmware and the Roku firmware are all the latest version?

I checked for firmware downloads on the Denon website to find out if there have been any updates since you bought it, but they don't have a firmware download page or at least none that I could find. Same with Roku.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

@jayeff - Sadly all the firmware is the latest.

의

댓글 달기

옵션

@beanman56 remove the Denon and connect it to something else. If it functions okay on that, you know it is not your receiver. If your Roku displays correctly on your TV as well, you know it is not your Roku. That will then leave an incompatibility between those two devices. Since your firmware is already updated etc. you may be at a proverbial brick wall where you can't use it.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Ben Capehart 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 80