질문이 없습니다. 가장 먼저 질문을 해 주십시오!
해당 기기를 고치는데 사용하는 일반 도구들 입니다. 매 단계에 모든 도구를 사용하지는 않습니다.
The Linksys WAP11 serves as a base for a reliable 11 Mbps wireless network. Released in 2001, it provides load balancing, network traffic filtering, roaming, and best access point selection. It supports up to 32 users/nodes. The Linksys WAP11 ships at 3 pounds, has a royal blue front panel, and is black/grey at the middle and rear of the device. Both antennas, placed in a rabbit-ear set up, are also black and removable. The words Wireless Access Point are displayed on the front panel, and additional identification (shown in the device picture) are at the top of the device.
Dimensions: 7.31" x 6.16" x 1.88" (186mm x 154mm x 48mm)
Unit Weight: 20.5 oz. (0.58 kg)
Power: 5V, 550mA Tx, 230mA Rx
Certifications: FCC Class C, CE Mark
Operating Temp.: 0ºC to 55ºC (32ºF to 131ºF)
Storage Temp.: 0ºC to 70ºC (32ºF to 158ºF)
Operating Humidity: 0% to 70% Non-Condensing
Storage Humidity: 0% to 95% Non-Condensing
Standards: IEEE 802.3 (10BaseT), IEEE 802.3u (100BaseTX)
IEEE 802.11b (Wireless)
Channels: 11 Channels (US, Canada)
13 Channels (Europe)
14 Channels (Japan)
Ports: One 10/100 RJ-45 Port
Cabling Type: UTP Category 5 or better
(Wireless): Indoors: Up to 300 ft. (97 m)
Outdoors: Up to 1500 ft. (457 m)
Data Rate: Up to 11Mbps (Wireless), 10/100Mbps (Ethernet)
LEDs: Power, Act, Link (Wired - Link/Activity)
*Information from Linksys WAP11 user manual.
Additional Information ¶
- Additional information and support can be found on the Linksys support website.
- You will also find a copy of the user manual here.
- Try this website for an additional user created guide to the device.
Diagnose, fix problems and find parts using the Linksys WAP11 Toubleshooting Guide.