Camera Assembly
문서
도구
해당 기기를 고치는데 사용하는 일반 도구들 입니다. 매 단계에 모든 도구를 사용하지는 않습니다.
Background
The UDI U818A is a quad-rotor six-axis gyro R/C drone released in 2014 by UDIRC, a company out of China. It comes “ready to fly” in the package, with no assembly required. Underneath the drone is the camera assembly, which takes a MicroSD card that is used to record video and still-shots.
The controller for the drone is very easy to use, with one thumb stick being used for thrust and direction, and the other for going front/back/left/right. Additionally, there is a “360 eversion” button on the controller that makes the drone do a backflip, and a shoulder button that puts it into “stunt mode” allowing it to do flips and other tricks.
Identification
Model U818A has a black frame with four propellers, two of which are white and the other two being black, and “UDIRC” in big letters directly in the center of the frame.
Repair Package
From the repair package there are a complete set of replacement propellers (2 white front, 2 black rear) and 4 small motor spindle gears to replace when stripped or otherwise damaged. Provided for these replacements are 1 short cross tip screwdriver.
Characteristics
Flight Time: 7min-9min
Battery Type: Rechargeable 3.7V, 500mAh, LiPo
Charging Time: 60min
Communication Distance: 300ft
AA Battery: 4 Required
Camera: 640×480 pixels
Skill Level: Beginner
Additional Information
- Buy on Amazon
- In-depth review of the UDI U818A: http://www.tomsguide.com/us/udi-u818a-dr...
- Manufacturer’s website: http://www.udirc.com/
- Helpful instructions on flying, battery life, and other information: http://dronebly.com/vital-facts-about-ud...