CHUWI GemiBook XPro Screen Replacement

최종 수정일 December 18, 2024

10 - 15 분

조정

소개

The CHUWI GemiBook XPro features a 14-inch 1920*1080 LCD screen that is great for their use; however, sometimes accidents can happen to the screen and you need to replace it.

필요한 것

도구

1 단계 Battery

CHUWI GemiBook XPro Screen Replacement, Battery: 1 단계, 이미지 2개 중 1개

CHUWI GemiBook XPro Screen Replacement, Battery: 1 단계, 이미지 2개 중 2개

Peel off the black tape on the upper-right side of the motherboard.

편집

2 단계

Use two opening tools or your fingernails to carefully "walk" the battery connector out of its socket.

편집

3 단계

CHUWI GemiBook XPro Screen Replacement: 3 단계, 이미지 3개 중 3개

Unseat the speaker wires and antenna wire from their retaining hooks on the battery with a halberd spudger.

편집

4 단계

Use a Phillips #1 screwdriver to remove the five 4.3 mm screws that secure the battery.

편집

5 단계

CHUWI GemiBook XPro Screen Replacement: 5 단계, 이미지 3개 중 3개

Lift the battery up and out of the chassis.

편집

6 단계 Screen

CHUWI GemiBook XPro Screen Replacement, Screen: 6 단계, 이미지 1개 중 1개

Carefully open the device screen side down.

편집

7 단계

CHUWI GemiBook XPro Screen Replacement: 7 단계, 이미지 3개 중 3개

Use a Phillips #1 screwdriver to remove the four 4.3 mm screws on the left hinge, and the three 4.3 mm screws on the right hinge.
Use a Phillips #1 screwdriver to remove one 5.6 mm hinge screw on the lower-right side of the right hinge.

편집