주요 콘텐츠로 건너뛰기
Cleaning the Fan Blades

Cleaning the Fan Blades

Vivian Fong

Vivian Fong5 다른 기여자

최종 수정일 January 28, 2014

5 분
매우 쉬움
액션 샷
더 나은 이미지가 필요함
잘못된 도구

This guide will disassemble the fan to clean the fan blades.

필요한 것

iFixit은 귀하가 이 링크를 통해 구매할 때 커미션을 받습니다.
  1. Cleaning the Fan Blades, PCB (Printed Circuit Board): 1 단계, 이미지 1개 중 1개
    • Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.

  2. Cleaning the Fan Blades: 2 단계, 이미지 1개 중 1개
    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely. It holds the wires.

  3. Cleaning the Fan Blades: 3 단계, 이미지 1개 중 1개
    • Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.

    • Shock warning: Make sure the fan is unplugged before removing the circuit board.

  4. Cleaning the Fan Blades: 4 단계, 이미지 1개 중 1개
    • Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.

  5. Cleaning the Fan Blades: 5 단계, 이미지 2개 중 1개 Cleaning the Fan Blades: 5 단계, 이미지 2개 중 2개
    • Remove the screws from the four corners of the circuit board.

    • Remove the circuit board from the top cover.

    • Do not touch the other side of the circuit board to avoid damaging the circuit elements.

  6. Cleaning the Fan Blades, Fan Blades: 6 단계, 이미지 1개 중 1개
    • Follow steps 1-4 to remove the front, back, and top covers of the fan to reach the fan blades.

    • Use a cloth to clean off dust clogged in between the fan blades.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

5다른 기여자 명과 함께

Vivian Fong

회원 가입일: 09/26/12

97 평판

안내서 1개를 작성함

Cal Poly, Team 15-46, Forte Fall 2012 Cal Poly, Team 15-46, Forte Fall 2012 회원

CPSU-FORTE-F12S15G46

5 회원들

안내서 6개를 작성함

댓글 0개

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 7

지난 30일: 28

전체 시간: 10,713