주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Make sure the laptop is powered down before you remove the battery.
    • Make sure the laptop is powered down before you remove the battery.

  2. Locate the battery release switch on the bottom of the laptop.
    • Locate the battery release switch on the bottom of the laptop.

  3. Slide the battery release switch away from the lock symbol towards the “unlock” position. A click sound will let you know it has unlocked.
    • Slide the battery release switch away from the lock symbol towards the “unlock” position. A click sound will let you know it has unlocked.

  4. The battery will rotate outward by lifting the bottom lip that pops out, and rotating it towards the top of the laptop until the battery comes free from the laptop. The battery will rotate outward by lifting the bottom lip that pops out, and rotating it towards the top of the laptop until the battery comes free from the laptop.
    • The battery will rotate outward by lifting the bottom lip that pops out, and rotating it towards the top of the laptop until the battery comes free from the laptop.

  5. 안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기

    안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기
  6. Keyboard Insert a spudger next to the 5 plastic indents located at the top of the keyboard and gently pry to release the securing clips.
    • Keyboard

    • Insert a spudger next to the 5 plastic indents located at the top of the keyboard and gently pry to release the securing clips.

  7. Lift the keyboard off of the computer. *Be careful not to tear the ribbon that attaches the back of the keyboard to the computer when lifting it.* Lift the keyboard off of the computer. *Be careful not to tear the ribbon that attaches the back of the keyboard to the computer when lifting it.*
    • Lift the keyboard off of the computer. *Be careful not to tear the ribbon that attaches the back of the keyboard to the computer when lifting it.*

  8. Flip the keyboard over onto the palm-rest assembly.
    • Flip the keyboard over onto the palm-rest assembly.

  9. Flip the black securing bar near the base of the ribbon with a spudger to release the ribbon from the computer. Flip the black securing bar near the base of the ribbon with a spudger to release the ribbon from the computer.
    • Flip the black securing bar near the base of the ribbon with a spudger to release the ribbon from the computer.

  10. CD-Drive
    • CD-Drive

    • Flip the computer over, *screen down* and unscrew the 1 screw in the middle located below the battery with a J0 bit tipped screwdriver.

  11. Next using the J0 bit tipped screwdriver unscrew the 2 remaining screws shown in the picture.
    • Next using the J0 bit tipped screwdriver unscrew the 2 remaining screws shown in the picture.

  12. After all 3 screws are removed take a spudger and pry the CD-Drive out of the computer. After all 3 screws are removed take a spudger and pry the CD-Drive out of the computer.
    • After all 3 screws are removed take a spudger and pry the CD-Drive out of the computer.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Chandler Champion

회원 가입일: 2018년 01월 23일

364 평판

안내서 3개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 61