-
-
Starting on the right side of the system, use a plastic scribe to pry up the keyboard from the computer.
-
-
-
Lift the clip to release the keyboard cable and disconnect it from the computer.
-
-
-
-
Using a plastic scribe pry out the rubber pads that cover the front screws on the base cover.
-
-
-
Disconnect the quick launch board cable, the finger print reader cable, and the palmrest cable from the system board.
-
-
-
Disconnect the power LED cable and the LED board cable from the system board.
-
-
-
Pry along the edges of the palmrest to release the palmrest.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 4명이 해당 안내서를 완성하였습니다.