Disassembling IBM ThinkPad T42 Rear Cover
The disassembly of the rear cover is simple but requires the removal of a lot of screws.
필요한 것
-
-
Use a Phillips #0 screwdriver to remove the twenty screws on the underside of the T42.
-
-
-
-
Remove the four Phillips screws located on either side of the rear of the T42 (there are two on each end.)
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.
팀
Cal Poly, Team 29-76, Johann Spring 2010 Cal Poly, Team 29-76, Johann Spring 2010 회원
CPSU-JOHANN-S10S29G76
4 회원들
안내서 37개를 작성함
