주요 콘텐츠로 건너뛰기
Gateway NV52 WiFi Card Replacement

Gateway NV52 WiFi Card Replacement

Ruben

Ruben4 다른 기여자

최종 수정일 August 21, 2020

15 분
조정
전제 조건 누락

The only prerequisite for the WiFi card is the Base Cover.

필요한 것

도구

  1. Gateway NV52 WiFi Card Replacement, Base Cover: 1 단계, 이미지 1개 중 1개
    • Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.

  2. Gateway NV52 WiFi Card Replacement: 2 단계, 이미지 1개 중 1개
    • Lift up the base cover from the the top with your hands to a 90 degree angle.

    • Remove the base cover and place it in a safe and dry place.

  3. Gateway NV52 WiFi Card Replacement, WiFi Card: 3 단계, 이미지 1개 중 1개
    • Remove the 3/16" screw located at the bottom left corner of the WiFi card using a Phillips #0 Screwdriver.

  4. Gateway NV52 WiFi Card Replacement: 4 단계, 이미지 1개 중 1개
    • Locate the black and white cables attached to the WiFi card.

    • Gently wiggle the black cable until it detaches from the WiFi card.

    • Repeat the previous step for the white cable.

  5. Gateway NV52 WiFi Card Replacement: 5 단계, 이미지 1개 중 1개
    • Gently, remove the Wifi card from its slot, and place it in a dry and safe place.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

4다른 기여자 명과 함께

Ruben

회원 가입일: 04/22/14

298 평판

안내서 2개를 작성함

Cal Poly, Team 7-24, Regan Spring 2014 Cal Poly, Team 7-24, Regan Spring 2014 회원

CPSU-REGAN-S14S7G24

4 회원들

안내서 18개를 작성함

댓글 0개

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 2

전체 시간: 1,297