주요 콘텐츠로 건너뛰기

소개

Back Removal.

부품

지정된 부품이 없습니다.

  1. Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up. Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.
    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

  2. Loosen  the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand. Loosen  the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.
    • Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

  3. Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.
    • Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

  4. Remove the backplate by pulling it back towards you.
    • Remove the backplate by pulling it back towards you.

    • Small plastic tabs hold in the backplate, pull these up to remove it.

결론

To reassemble your device, follow these instructions in reverse order.

Maxwell Snook

회원 가입일: 2015년 10월 01일

173 평판

안내서 1개 작성함

Cal Poly, Team 1-20, Maness Fall 2015 Cal Poly, Team 1-20, Maness Fall 2015 회원

CPSU-MANESS-F15S1G20

4 회원들

안내서 12개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 32