기기를 수리하세요 커뮤니티 상점

LG Front Load Washing Machine Stator Replacement

소개

Use this guide to replace the stator in your LG front load washing machine.

The stator is part of the direct drive motor. If the motor is broken, it's possible that one or more of the stator coils is burnt out.

This guide will work for most LG front load washing machines. This guide is written with a model WM3050CW washer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

필요한 것

  1. LG Front Load Washing Machine Stator Replacement, Safety Precautions: 1 단계, 이미지 1/2 LG Front Load Washing Machine Stator Replacement, Safety Precautions: 1 단계, 이미지 2/2

    • Before you begin your repair, perform the following:

    • Turn off the main water supply

    • Unplug your washer

    • Disconnect all water connections at the rear of your washer

    편집

  2. LG Front Load Washing Machine Stator Replacement, Unfasten the rear panel: 2 단계, 이미지 1/3 LG Front Load Washing Machine Stator Replacement, Unfasten the rear panel: 2 단계, 이미지 2/3 LG Front Load Washing Machine Stator Replacement, Unfasten the rear panel: 2 단계, 이미지 3/3

    • Remove the screw(s) securing the rear panel.

    편집

  3. LG Front Load Washing Machine Stator Replacement, Remove the rear panel: 3 단계, 이미지 1/3 LG Front Load Washing Machine Stator Replacement, Remove the rear panel: 3 단계, 이미지 2/3 LG Front Load Washing Machine Stator Replacement, Remove the rear panel: 3 단계, 이미지 3/3

    • Unclip the rear panel from the chassis.

    편집

  4. LG Front Load Washing Machine Stator Replacement: 4 단계, 이미지 1/1

    • Remove the rear panel.

    편집

  6. LG Front Load Washing Machine Stator Replacement, Unfasten the rotor: 5 단계, 이미지 1/2 LG Front Load Washing Machine Stator Replacement, Unfasten the rotor: 5 단계, 이미지 2/2

    • Use an impact driver to remove the 17 mm nut securing the rotor.

    • Alternatively, you can use a wrench and a hammer to loosen the nut.

    • To secure the rotor, you can insert a screwdriver, or a similar tool, between the rotor and the stator. Make sure to brace the tool against one of the screw bosses on the stator.

    편집

  7. LG Front Load Washing Machine Stator Replacement, Remove the rotor: 6 단계, 이미지 1/2 LG Front Load Washing Machine Stator Replacement, Remove the rotor: 6 단계, 이미지 2/2

    • The rotor is magnetically attracted to the stator.

    • Pull the rotor straight off the stator and drive shaft splines to remove it.

    • Wiggle the rotor as you pull to help disconnect it.

    • This may require significant force.

    • During reassembly, watch your fingers when aligning the rotor over the stator, as the rotor gets sucked in easily.

    편집

  8. LG Front Load Washing Machine Stator Replacement, Unfasten the motor harness: 7 단계, 이미지 1/1

    • Remove the screw(s) securing the motor harness.

    편집

  9. LG Front Load Washing Machine Stator Replacement, Unfasten the stator: 8 단계, 이미지 1/2 LG Front Load Washing Machine Stator Replacement, Unfasten the stator: 8 단계, 이미지 2/2

    • Hold the stator up as you unfasten the last few bolts, as it can fall over unexpectedly.

    • Remove the bolts securing the stator.

    • During reassembly, refasten the screws in a "star" pattern.

    편집

  10. LG Front Load Washing Machine Stator Replacement, Reposition the stator: 9 단계, 이미지 1/3 LG Front Load Washing Machine Stator Replacement, Reposition the stator: 9 단계, 이미지 2/3 LG Front Load Washing Machine Stator Replacement, Reposition the stator: 9 단계, 이미지 3/3

    • Don't pull the stator too far away from the device, as it's still connected by wires.

    • Pull the stator out of its slot on the drum, and flip it so its rear is facing upward.

    편집

  11. LG Front Load Washing Machine Stator Replacement, Disconnect the stator: 10 단계, 이미지 1/3 LG Front Load Washing Machine Stator Replacement, Disconnect the stator: 10 단계, 이미지 2/3 LG Front Load Washing Machine Stator Replacement, Disconnect the stator: 10 단계, 이미지 3/3

    • Disconnect the connectors attached to the stator.

    • Always grip cables by their connectors and not the wires themselves.

    편집

  12. LG Front Load Washing Machine Stator Replacement, Remove the rotor position sensor: 11 단계, 이미지 1/3 LG Front Load Washing Machine Stator Replacement, Remove the rotor position sensor: 11 단계, 이미지 2/3 LG Front Load Washing Machine Stator Replacement, Remove the rotor position sensor: 11 단계, 이미지 3/3

    • Use your fingers to unclip the rotor position sensor from the stator.

    • Pull the sensor away from the stator to completely unclip it.

    • Remove the rotor position sensor.

    • You're left with the stator.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Bill Gilbert

회원 가입일: 06/30/22

30,088 평판

안내서 213개 작성하였습니다

배지: 27

배지 +24개 더

팀

iFixit iFixit 회원

Staff

136 회원들

안내서 17,430개 작성하였습니다

댓글 3개

I don’t have comment just question. Does this particular model have a drive belt? Mine is not spinning properly

Leilani Seymour - 답글

No it does not. It is a direct drive machine, meaning that the motor drives the wash basket directly. Take a look at this link for some help.

Bill Gilbert -

I undertook this repair with the wd14071sd6 model to replace the hall sensor as I was getting the LE error code. I have noted on step 2 that the entire back panel had to be removed to access the rotor. This is very very awkward, as multiple electrics are also connected to the panel via plastic clips.

Despite this, the repair can be achieved without any major electric disconnection work just a matter or having enough space to carefully remove things.

Phill Birtles - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 17

30일 전: 56

전체 시간: 786