주요 콘텐츠로 건너뛰기
Levoit LV-H132 Springs Replacement

Levoit LV-H132 Springs Replacement

Kris Sathwara

Kris Sathwara5 다른 기여자

최종 수정일 December 19, 2023

20 분
어려움
더 많은 이미지가 필요함

If the touch mechanism on your Levoit LV-H132 device is not working when it's switched on, the touch button springs might be damaged due to exposure to extreme temperatures, humidity, or corrosive chemicals.

필요한 것

도구

더보기...

  1. Levoit LV-H132 Springs Replacement, Springs: 1 단계, 이미지 2개 중 1개 Levoit LV-H132 Springs Replacement, Springs: 1 단계, 이미지 2개 중 2개
    • Pry off the plastic top using a metal spudger.

  2. Levoit LV-H132 Springs Replacement: 2 단계, 이미지 2개 중 1개 Levoit LV-H132 Springs Replacement: 2 단계, 이미지 2개 중 2개
    • Remove the three 1.2 mm screws with a Phillips #1 screwdriver.

  3. Levoit LV-H132 Springs Replacement: 3 단계, 이미지 2개 중 1개 Levoit LV-H132 Springs Replacement: 3 단계, 이미지 2개 중 2개
    • Disconnect the top half from the bottom.

  4. Levoit LV-H132 Springs Replacement: 4 단계, 이미지 3개 중 1개 Levoit LV-H132 Springs Replacement: 4 단계, 이미지 3개 중 2개 Levoit LV-H132 Springs Replacement: 4 단계, 이미지 3개 중 3개
    • Disconnect the circuit board cable.

  5. Levoit LV-H132 Springs Replacement: 5 단계, 이미지 2개 중 1개 Levoit LV-H132 Springs Replacement: 5 단계, 이미지 2개 중 2개
    • Remove the two 5 mm screws with a Phillips #1 screwdriver.

  6. Levoit LV-H132 Springs Replacement: 6 단계, 이미지 1개 중 1개
    • Desolder the joints holding the springs.

    • Slide out the faulty springs.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

5다른 기여자 명과 함께

Kris Sathwara

회원 가입일: 09/14/23

133 평판

안내서 1개를 작성함

댓글 0개

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 4

지난 30일: 8

전체 시간: 127