주요 콘텐츠로 건너뛰기
Nexus Q Inner Dome Daughterboard Replacement

Nexus Q Inner Dome Daughterboard Replacement

Alex Thomas

Alex Thomas8 다른 기여자

최종 수정일 June 9, 2015

10 분
쉬움
추천 가이드
추천 학생 안내서

Replace your worn out inner dome daughterboard: which contains Atmel ATMEGA328P, NXP Semiconductors 44501 Near-Field Communications Controller, TXC 8.00 MHz Crystal Quartz Oscillator, YF04E, and the status LED.

필요한 것

도구

더보기...

  1. Nexus Q Inner Dome Daughterboard Replacement, Taoglas PU18 Wi-Fi Dual Band Antenna: 1 단계, 이미지 1개 중 1개
    • Squeeze and pull to pop the cap off of the Nexus Q.

  2. Nexus Q Inner Dome Daughterboard Replacement: 2 단계, 이미지 2개 중 1개 Nexus Q Inner Dome Daughterboard Replacement: 2 단계, 이미지 2개 중 2개
    • Disconnect the taoglas Wi-Fi Dual Band Antenna by prying with a spudger.

    • Once the antenna is disconnected, simply pull it off the outside of the inner dome.

  3. Nexus Q Inner Dome Daughterboard Replacement, Inner Dome Daughterboard: 3 단계, 이미지 1개 중 1개
    • Undo the ZIF connector by prying with a spudger.

  4. Nexus Q Inner Dome Daughterboard Replacement: 4 단계, 이미지 1개 중 1개
    • Use a T10 Torx screwdriver to remove the four 1.3 mm screws holding the inner dome in place.

  5. Nexus Q Inner Dome Daughterboard Replacement: 5 단계, 이미지 1개 중 1개
    • Use a T6 Torx screwdriver to undo the three 0.8 mm screws holding the inner dome daughterboard in place.

  6. Nexus Q Inner Dome Daughterboard Replacement: 6 단계, 이미지 1개 중 1개
    • Use a spudger to disconnect the daughterboard from the ZIF connector.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

8다른 기여자 명과 함께

Alex Thomas

회원 가입일: 01/31/13

27 평판

안내서 3개를 작성함

Cal Poly, Team 7-10, Maness Winter 2013 Cal Poly, Team 7-10, Maness Winter 2013 회원

CPSU-MANESS-W13S7G10

4 회원들

안내서 5개를 작성함

댓글 0개

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 6

지난 30일: 7

전체 시간: 930