주요 콘텐츠로 건너뛰기

필요한 것

  1. Nintendo DSi XL Lower Case Replacement, Battery: 1 단계, 이미지 1/2 Nintendo DSi XL Lower Case Replacement, Battery: 1 단계, 이미지 2/2
    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

  2. Nintendo DSi XL Lower Case Replacement: 2 단계, 이미지 1/1
    • Lift the battery from the DSi XL.

  3. Nintendo DSi XL Lower Case Replacement, Lower Case: 3 단계, 이미지 1/3 Nintendo DSi XL Lower Case Replacement, Lower Case: 3 단계, 이미지 2/3 Nintendo DSi XL Lower Case Replacement, Lower Case: 3 단계, 이미지 3/3
    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

  4. Nintendo DSi XL Lower Case Replacement: 4 단계, 이미지 1/1
    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

  5. Nintendo DSi XL Lower Case Replacement: 5 단계, 이미지 1/3 Nintendo DSi XL Lower Case Replacement: 5 단계, 이미지 2/3 Nintendo DSi XL Lower Case Replacement: 5 단계, 이미지 3/3
    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

  6. Nintendo DSi XL Lower Case Replacement: 6 단계, 이미지 1/2 Nintendo DSi XL Lower Case Replacement: 6 단계, 이미지 2/2
    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

  7. Nintendo DSi XL Lower Case Replacement: 7 단계, 이미지 1/2 Nintendo DSi XL Lower Case Replacement: 7 단계, 이미지 2/2
    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

David Hodson

회원 가입일: 2010년 04월 13일

147,802 평판

안내서 127개 작성하였습니다

0 Comments

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 15

30일 전: 90

전체 시간: 7,639