물건을 수리하세요 커뮤니티 상점

Nintendo GameCube Controller Buttons Replacement

소개

This guide will show you how to properly remove most of the buttons from the controller. You may want to read this if your buttons are sticky

필요한 것

  1. Nintendo GameCube Controller Buttons Replacement, Back Panel: 1 단계, 이미지 1개 중 1개

    • Place the controller (buttons down) on a solid surface.

    • Remove the six 9.2mm Tri-wing Y0 screws that hold the back panel in place.

    편집

  2. Nintendo GameCube Controller Buttons Replacement: 2 단계, 이미지 1개 중 1개

    • Gently lift the back panel up, separating it from the front panel.

    • Some of the buttons may fall out if they are knocked around.

    편집

  3. Nintendo GameCube Controller Buttons Replacement, Z Button: 3 단계, 이미지 2개 중 1개 Nintendo GameCube Controller Buttons Replacement, Z Button: 3 단계, 이미지 2개 중 2개

    • Grab the Z-button by the peg with tweezers and lift it out of the controller.

    • During re-assembly, make sure the plastic rim and spring fit into the slot provided, or else the case will not shut.

    편집

  5. Nintendo GameCube Controller Buttons Replacement, Circuit Board: 4 단계, 이미지 1개 중 1개

    • Carefully unhook the cable that is looped around the peg.

    편집

  6. Nintendo GameCube Controller Buttons Replacement: 5 단계, 이미지 1개 중 1개

    • Lift the circuit board out of the controller.

    • Do not grab the rumble motor to lift the circuit board as shown in the picture. It will in many cases just remove the rumble motor. Instead, grab the edges of the board.

    편집

  7. Nintendo GameCube Controller Buttons Replacement, Buttons: 6 단계, 이미지 2개 중 1개 Nintendo GameCube Controller Buttons Replacement, Buttons: 6 단계, 이미지 2개 중 2개

    • Remove the rubber backing that covers the buttons.

    편집

  8. Nintendo GameCube Controller Buttons Replacement: 7 단계, 이미지 3개 중 1개 Nintendo GameCube Controller Buttons Replacement: 7 단계, 이미지 3개 중 2개 Nintendo GameCube Controller Buttons Replacement: 7 단계, 이미지 3개 중 3개
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Use tweezers to lift buttons out of their sockets.

    • When putting the buttons back, make sure the slots properly fit back together.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 19명이 해당 안내서를 완성하였습니다.

작성자

7다른 기여자 명과 함께

Sean Michel

회원 가입일: 01/14/13

2,544 평판

안내서 8개를 작성함

배지: 18

배지 +15개 더

팀

Cal Poly, Team 19-44, Regan Winter 2013 Cal Poly, Team 19-44, Regan Winter 2013 회원

CPSU-REGAN-W13S19G44

4 회원들

안내서 31개를 작성함

댓글 3개

Is there a way I can buy the buttons separably? I lost a the X button and it's gone missing and i wanna buy one :(

tp4yourbunghole - 답글

u can either get a 2 dollar full button set on ebay by searching ngc buttons or u can buy from battle beaver customs for 1 dollar

dariuscorrfz - 답글

How do you put the back back on?

Steven Enns - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 10

지난 30일: 71

전체 시간: 30,292