소개

Use this guide to replace a broken keyboard.

부품

부품은 필요하지 않습니다.

Turn the laptop upside-down, with the handle facing away from you.
  • Turn the laptop upside-down, with the handle facing away from you.

댓글 쓰기

Pull the lock tabs towards the green outer edges of the laptop.
  • Pull the lock tabs towards the green outer edges of the laptop.

  • Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

댓글 쓰기

  • Lift up on the middle of the battery to remove it from the device.

댓글 쓰기

  • Remove the two 2mm Phillips #1 screws from beneath the battery lock tabs.

댓글 쓰기

  • Flip the laptop over to its normal position.

  • Lift the two antennas on both sides to unlock the screen.

  • Open the laptop.

댓글 쓰기

  • Be careful not to pull the keyboard too far because there is still a ribbon cable attached to the bottom.

  • Gently lift up on the back of the keyboard.

  • Pull the keyboard up far enough to expose the ribbon cable.

댓글 쓰기

  • Gently lift up on the black connector to release the ribbon cable.

  • Gently pull the blue plastic tab up and away from the black connector.

  • Remove the keyboard from the laptop.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Michael Kellerman

회원 가입일: 2013년 01월 24일

46 평판

안내서 3개 작성하였습니다

Cal Poly, Team 3-30, Amido Winter 2013 Cal Poly, Team 3-30, Amido Winter 2013 회원

CPSU-AMIDO-W13S3G30

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 484