주요 콘텐츠로 건너뛰기

소개

This guide will demonstrate how to replace the motherboard in your One Education Infinity:One laptop.

  1. One Education Infinity:One Motherboard Replacement, Battery: step 1, image 1 of 2 One Education Infinity:One Motherboard Replacement, Battery: step 1, image 2 of 2
    • Use a spudger to disconnect the black bundled cable connector from the motherboard.

  2. One Education Infinity:One Motherboard Replacement: step 2, image 1 of 3 One Education Infinity:One Motherboard Replacement: step 2, image 2 of 3 One Education Infinity:One Motherboard Replacement: step 2, image 3 of 3
    • Use a spudger to lift the black tab on top of the ZIF connector.

    • Slide the ribbon cable out of the connector.

  3. One Education Infinity:One Motherboard Replacement: step 3, image 1 of 3 One Education Infinity:One Motherboard Replacement: step 3, image 2 of 3 One Education Infinity:One Motherboard Replacement: step 3, image 3 of 3
    • Use a spudger to flip up the black retaining flap on the ZIF connector.

    • Pull the folded ribbon cable straight out of the connector.

    • This ribbon cable must be disconnected before removing the battery because it is attached to the battery with adhesive.

  4. One Education Infinity:One Motherboard Replacement: step 4, image 1 of 1
    • Use a spudger to pry the battery away from the device.

    • Always use ESD safe tools when working with delicate electrical components.

  5. One Education Infinity:One Motherboard Replacement, Antenna: step 5, image 1 of 2 One Education Infinity:One Motherboard Replacement, Antenna: step 5, image 2 of 2
    • Use ESD safe tweezers to disconnect the antenna from the motherboard.

  6. One Education Infinity:One Motherboard Replacement, Motherboard: step 6, image 1 of 3 One Education Infinity:One Motherboard Replacement, Motherboard: step 6, image 2 of 3 One Education Infinity:One Motherboard Replacement, Motherboard: step 6, image 3 of 3
    • Use a spudger to flip up the black flap on the camera's ZIF connector.

    • Pull the ribbon cable straight out of the connector.

  7. One Education Infinity:One Motherboard Replacement: step 7, image 1 of 1
    • Use tweezers to pull the dock connection cable away from the motherboard.

  8. One Education Infinity:One Motherboard Replacement: step 8, image 1 of 1
    • Use a Phillips #00 screwdriver to unscrew the two 3.4 mm screws.

    • Use a Phillips #000 screwdriver to unscrew the one 4.2mm screw.

  9. One Education Infinity:One Motherboard Replacement: step 9, image 1 of 1
    • Lift the protective shield away from the motherboard.

  10. One Education Infinity:One Motherboard Replacement: step 10, image 1 of 3 One Education Infinity:One Motherboard Replacement: step 10, image 2 of 3 One Education Infinity:One Motherboard Replacement: step 10, image 3 of 3
    • With the flat end of a spudger, flip up the black flap on the display's ZIF connector.

    • Insert the pointed end of the spudger between the cable and the motherboard and gently pull the cable straight out of the connector.

    • During reassembly, be sure to insert the cable into the connector up to the white line on the cable and then close the retaining flap.

  11. One Education Infinity:One Motherboard Replacement: step 11, image 1 of 1
    • Gently lift the motherboard away from the display assembly.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Taylor Bratsch

회원 가입일: 2016년 09월 06일

5,360 평판

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 5

전체 시간: 329