소개

Need to access the interior. Here's how to take off the case to do that.

Position the phone so the screen faces down.
  • Position the phone so the screen faces down.

  • Remove the stylus found on the back of the phone.

댓글 쓰기

To remove the battery cover, hold down the button in the middle of the phone's back.
  • To remove the battery cover, hold down the button in the middle of the phone's back.

  • Slide the cover down to remove. Set the cover aside.

댓글 쓰기

  • Lift the edge of the battery, separating contact points, and pull out as pictured.

댓글 쓰기

  • Remove the small round rubber cover on the back of the phone located immediately below the antenna.

  • This will uncover a screw that will be removed in the next step.

댓글 쓰기

  • Unscrew six black 6.9 mm Torx screws with a T5 Torx Screwdriver.

  • Unscrew one 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver.

  • Pull out antenna.

댓글 쓰기

  • Pry the back cover off using a spudger or similar tool.

  • The back cover is attached by several small clips on the inside.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

mmedrano

회원 가입일: 2009년 11월 15일

67 평판

안내서 2개 작성하였습니다

Cal Poly, Team 19-3, Maness Fall 2009 Cal Poly, Team 19-3, Maness Fall 2009 회원

CPSU-MANESS-F09S19G3

4 회원들

안내서 18개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 2,814