메뉴

설정

내 작업대

귀하의 기기에 대한 안내서, 부품 및 답변에 신속히 접근할 수 있습니다
내 장바구니

장바구니가 비어 있는 것 같습니다

상점 둘러보기

PlayStation Vita Case Separation

작성자 Brittany McCrigler (또 다른 기여자 5명)
  • 댓글 3
  • 즐겨찾기 0

난이도

쉬움

단계

8

소요 시간

15 분

섹션

1

플래그

1

Prerequisite Only

단지 전제 조건

해당 안내서는 단지 다른 안내서의 전제 조건임을 참고하시기 바랍니다.

소개

Prerequisite Guide

도구

해당 도구 구매

부품

지정된 부품이 없습니다.

  1. Power off and remove the memory card. Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

    편집

  2. Using your fingernail or a spudger, pry open the accessory port cover on the top of the device. Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover. Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

    편집

  3. Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port. Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

    편집

  4. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

  5. Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases. Continue working your way around the device gently prying it open. There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

    편집

  6. Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together. Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    편집

  7. Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

    편집

  8. Free the battery cable by gently prying up on the connection with a spudger.

    • Free the battery cable by gently prying up on the connection with a spudger.

    편집

  9. Separate the front and rear cases.

    • Separate the front and rear cases.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

Brittany McCrigler

회원 가입일: 2012년 03월 05일

82,219 평판

안내서 132개 작성하였습니다

배지: 48

배지 +45개 더

댓글 0개

의견 추가하세요

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 5

전체 시간: 103