주요 콘텐츠로 건너뛰기
Promowide SP1790 Charging Port Replacement

Promowide SP1790 Charging Port Replacement

Joseph Malone

Joseph Malone7 다른 기여자

최종 수정일 January 23, 2018

6 - 9 분
쉬움
마크업 사고
더 많은 이미지가 필요함

This guide will instruct you on how to replace the charging port in this speaker. This will ensure the performance of the device's wireless function.

필요한 것

부품

도구

더보기...

  1. Promowide SP1790 Charging Port Replacement, Battery Wire: 1 단계, 이미지 1개 중 1개
    • Locate the six screws on the back of the speaker.

  2. Promowide SP1790 Charging Port Replacement: 2 단계, 이미지 1개 중 1개
    • Unscrew each of the six screws, then set them aside.

  3. Promowide SP1790 Charging Port Replacement: 3 단계, 이미지 1개 중 1개
    • Gently remove the back cover of the speaker.

  4. Promowide SP1790 Charging Port Replacement: 4 단계, 이미지 1개 중 1개
    • Place the speaker upside down.

    • Remove the battery cover located in the center of the speaker.

  5. Promowide SP1790 Charging Port Replacement: 5 단계, 이미지 1개 중 1개
    • Locate and remove the four screws under each of the pads near the power socket.

  6. Promowide SP1790 Charging Port Replacement: 6 단계, 이미지 1개 중 1개
    • Gently remove the bottom.

    • Do NOT pull out or damage wires.

  7. Promowide SP1790 Charging Port Replacement: 7 단계, 이미지 1개 중 1개
    • Remove the single motherboard screw.

  8. Promowide SP1790 Charging Port Replacement: 8 단계, 이미지 1개 중 1개
    • Remove both of the screws holding the power socket to the bottom chassis.

  9. Promowide SP1790 Charging Port Replacement: 9 단계, 이미지 1개 중 1개
    • Desolder and remove the old wire.

    • Insert the new wire and solder it into place.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

7다른 기여자 명과 함께

Joseph Malone

회원 가입일: 06/01/16

160 평판

안내서 1개를 작성함

댓글 0개

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 6

지난 30일: 20

전체 시간: 1,000