물건을 수리하세요 커뮤니티 상점

Shark ION Robot S87 Filter Replacement

소개

Is your Shark ION Robot S87 sound alarm blinking or is there no suction anymore ? The primary reason for these occurrences is dirty filters. Dirty filters are caused by debris and hair being sucked into the vacuum. To avoid this, change your filter periodically because they get dirty, and may even crack from various items. If you are experiencing this issue, here is an easy guide to fix it.

필요한 것

  1. Shark ION Robot S87 Filter Replacement, Filter: 1 단계, 이미지 2개 중 1개 Shark ION Robot S87 Filter Replacement, Filter: 1 단계, 이미지 2개 중 2개

    • Flip the Shark ION Robot so that the underside is facing up.

    • Hold the button on the bottom of the vacuum, and slide the tray away from the device.

    번역하기

  3. Shark ION Robot S87 Filter Replacement: 2 단계, 이미지 3개 중 1개 Shark ION Robot S87 Filter Replacement: 2 단계, 이미지 3개 중 2개 Shark ION Robot S87 Filter Replacement: 2 단계, 이미지 3개 중 3개

    • Detach the orange filter by holding the grip out from the trash tray.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

3다른 기여자 명과 함께

Tommy Chang

회원 가입일: 01/14/20

222 평판

안내서 2개를 작성함

배지: 5

배지 +2개 더

팀

York University, Team S1-G7, Woodhouse Winter 2020 York University, Team S1-G7, Woodhouse Winter 2020 회원

YORK-WOODHOUSE-W20S1G7

3 회원들

안내서 12개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 23

전체 시간: 1,454