주요 콘텐츠로 건너뛰기

소개

If your 6-8 inch Personal Table Fan has been lagging or the blades have broke. Use this guide to replace the blades in your fan.

Before using this guide, make sure your fan works when plugged in. If it does not, the blades are not the issue, the motor is and this guide will not fix the issue.

Before beginning, make sure to unplug your fan.



부품

지정된 부품이 없습니다.

  1. Table Fan Blades Replacement, Blades: step 1, image 1 of 3 Table Fan Blades Replacement, Blades: step 1, image 2 of 3 Table Fan Blades Replacement, Blades: step 1, image 3 of 3
    • Use a prying tool to loosen the front cover.

    • After it is pried loose, remove the cover.

  2. Table Fan Blades Replacement: step 2, image 1 of 1
    • Remove two 12.7 mm Phillips #2 screws from the back cover.

    • Take off the back cover.

  3. Table Fan Blades Replacement: step 3, image 1 of 1
    • Remove two 38.1 mm Phillips #2 screws from the motor.

  4. Table Fan Blades Replacement: step 4, image 1 of 3 Table Fan Blades Replacement: step 4, image 2 of 3 Table Fan Blades Replacement: step 4, image 3 of 3
    • While holding the back of the fan, pull the blades.

    • Take off the old blades and put them aside.

  5. Table Fan Blades Replacement: step 5, image 1 of 1
    • Take the motor out.

  6. Table Fan Blades Replacement: step 6, image 1 of 2 Table Fan Blades Replacement: step 6, image 2 of 2
    • Clean all parts of the fan.

  7. Table Fan Blades Replacement: step 7, image 1 of 2 Table Fan Blades Replacement: step 7, image 2 of 2
    • Put the motor and back cover back on.

    • This can be done by following steps 2, 3, and 5 in reverse.

  8. Table Fan Blades Replacement: step 8, image 1 of 1
    • Place the new blade onto the metal rod on the front of the fan.

    • Push the blades onto the rod so that it is sturdy.

    • Replace the front cover.

결승점

Cora Diehl

회원 가입일: 2021년 01월 20일

157 평판

안내서 1개 작성함

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 4

30일 전: 47

전체 시간: 229