Wahl Lithium Ion 5537C Blade Replacement

최종 수정일 July 15, 2024

4 - 8 분

쉬움

소개

Consumers love grooming electronics which help save them their time in their normal busy life. A electrical shaver by Wahl is widely used and accepted worldwide, so users sometimes throw out their electrical shaver just because of a malfunctioning blade. You would find this guide the best one to eliminate the need to shop for new trimmers over a period of time and also the cheapest way to take care of your hygiene. Be aware of the used blade and bacteria might be harmful. Always dispose off metal blades where they are out of reach of small kids as blades can be fatal. Hence this guide helps users to replace their current shaver blade with a new one.

필요한 것

도구

iFixit은 귀하가 이 링크를 통해 구매할 때 커미션을 받습니다.

1 단계 Shaver Blade

Wahl Lithium Ion 5537C Blade Replacement, Shaver Blade: 1 단계, 이미지 2개 중 1개

Wahl Lithium Ion 5537C Blade Replacement, Shaver Blade: 1 단계, 이미지 2개 중 2개

Take out the batteries by pulling off the cover from the back and once done put the cover back on.

번역하기

2 단계

Wahl Lithium Ion 5537C Blade Replacement: 2 단계, 이미지 3개 중 3개

Using the Phillips #0 screwdriver, remove the two screws on the blade and place them in the container.
Detach the blade from the body of the shaver and also remove the blade supporting mounts.

번역하기

3 단계

Wahl Lithium Ion 5537C Blade Replacement: 3 단계, 이미지 3개 중 3개

Grab the replacement new blade and before mounting the support mount clean it with the cleaning brush to remove any dirt.
Place the supporting mount back to the new blade making sure it is properly attached.

번역하기

4 단계

Wahl Lithium Ion 5537C Blade Replacement: 4 단계, 이미지 3개 중 3개

Place the blade with mount attached to the trimmer such that the screw holes are visible through
Grab on the blade hard and torque both screws one by one.
Check if the blade is attached tightly to the trimmer.
Insert the batteries inside the trimmer and start using!