#1단계의 변경 사항
편집자 Grant Peters-
편집 승인됨 완료자 Grant Peters
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* red] Apply heat to both terminals of the capacitor with a |
|---|---|
| + | [* red] Apply heat to both terminals of the capacitor with a soldering iron until the solder begins to melt. |
| [* black] Gently pull on each leg of the capacitor once the solder has began to melt to remove the wire from the circuit board. |