#3단계의 변경 사항
단계 라인
| [* black] There are two ribbon cables securing the keyboard - data and backlight power. Each ribbon connector must be released by flipping the black retainer up with a fingernail or nylon Uspudger before pulling out the ribbon. | |
| [* black] First flip up the black retainer on the smaller connector. Slide the cable up and out of the connector. | |
| [* black] Secondly, flip the black connector up on the larger connector. Slide the cable straight out of the connector, parallel to the case. | |
| + | [* black] Remove the keyboard from the case. |