주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

편집자 Benson Smith-

편집 승인됨 완료자 Benson Smith

이전
이후
변경 사항 없음

단계 라인

[* red] After successfully removing the back cover, you will see two RAM Cards in the indicated slot.
-[* orange] Using the spatula, push down on the small switch that is indicated. This will release the cards from the slot.
-[* black] Afterwards remove the cards by pulling them out of the slot.
+[* orange] Using the spatula, push down on the flaps. This will release the cards from the slot.
+[* black] Remove the cards by pulling them out of the slot.