#4단계의 변경 사항
편집자 Lesly Covarrubias-
편집 승인됨 완료자 Lesly Covarrubias
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Find and remove the two screws located on each side of the camera. There's one additional screw on the side of the camera that isn't easily visible. It is located under the flap used for HDMI connection. You will have a total of three 0.4 mm Phillips screws after this step. |
|---|---|
| + | [* black] Keep working alongside each side of the camera until all screws are addressed. |
| + | [* black] In addition to the five screws from the bottom, a total of three more 0.4 mm black Phillips screws are located as indicated in the photo. Place them on the magnetic mat or plastic bag. |