#9단계의 변경 사항
편집자 Adam O'Camb-
편집 승인됨 완료자 Adam O'Camb
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] After heating the hinge till the case plastic started to bubble, a pair of vise grips were needed to pull the lid off. |
|---|---|
| - | [* black] Also the hinge is looking a bit more built-up compared to last year. |
| - | [* black] A bunch more heat for the battery, the case gets a little soft again. |
| - | [* black] One spudger wasn't quite enough to beat the thick battery adhesive so we asked for some help. |
| + | [* black] The hinge is looking like it might be reinforced compared to the last generation, and it definitely has the adhesive to match. |
| + | [* black] After giving the case almost more heat than it can handle, we still need vise grips to pull this thing out. |
| + | [* black] Next we're free to get at the battery, but that's easier said than done. |
| + | [* black] Against our better judgement, we heat the case further, watch for any battery swelling, and cross our fingers that the battery doesn't go Galaxy Note 7 on us. |
| + | [* black] After all that, one spudger couldn't quite fight through the thick adhesive under the battery, so we brought in reinforcements. |