주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

편집자 Jakob Rinkus-

편집 승인됨 완료자 Jakob Rinkus

이전
이후
변경 사항 없음

단계 라인

-[* red] Start by removing the two 9mm screws using a #0 phillips head screwdriver holding the back plate on.
-[* black] Once the two screws are removed lift the cover up using a fingernail.
+[* red] Remove the two 9mm screws using a #0 Phillips head screwdriver.
+[* black] Lift the cover up using a fingernail.