#4단계의 변경 사항
편집자 Emily Stephens-
편집 승인됨 완료자 Emily Stephens
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* blue] The hard drive ribbon cable is held in place by a black latch on the hard drive. |
|---|---|
| + | [* icon_note] This may be difficult to move, so take your time and be careful. |
| + | [* blue] The ribbon cable is held in place by a black latch on the hard drive. |
| [* green] Using a small flat head screwdriver, flip the black latch up 90 degrees. | |
| [* icon_caution] Make sure you are only flipping the black latch. Do not try to lift any wires or the white connector piece. | |
| - | [* icon_note] This may be a little difficult to move, so take your time and be careful. |