#8단계의 변경 사항
편집자 Taylor Dixon-
편집 승인됨 완료자 Taylor Dixon
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* icon_reminder] If your replacement back cover did not come with a flash or camera bezel, you will need to transfer the |
|---|---|
| + | [* icon_reminder] If your replacement back cover did not come with a flash diffuser or camera bezel, you will need to transfer them from your old cover to the new one. |
| [* black] Apply a heated iOpener directly over the bezels for a minute. | |
| - | [* black] Use an opening pick to slice around the |
| - | [* icon_note] The |
| - | [* black] Use an opening tool to pry up and remove the |
| - | [* black] Transfer the |
| + | [* black] Use an opening pick to slice around the camera bezel to loosen the adhesive. |
| + | [* icon_note] The camera bezel is made of plastic and cracks easily. Be sure to slice around the flash completely before you pry it off. |
| + | [* black] Use an opening tool to pry up and remove the flash diffuser. |
| + | [* black] Transfer the parts to your replacement cover. |