#8단계의 변경 사항
단계 라인
| + | [* black] Turn laptop around. On the back side remove the 3 silver screws shown as green circles in the figure. |
|---|---|
| + | [* black] Then take out the HDD (low right of picture) by pulling it up from the right side (connector area) and then sliding laterally to release the anchors in the left. |
| + | [* black] Remove the WIFI PCB (red box in figure). It has 2 long silver screws on the top. |
| + | [* black] Finally take out all the 14 black screws shown as red circles. |
이미지 1
이전 이미지 없음
추가