주요 콘텐츠로 건너뛰기

#10단계의 변경 사항

편집자 Eliseo-

편집 승인됨 완료자 Eliseo

이전
이후
변경 사항 없음

단계 라인

+[* black] Start with the two purple areas on the low left side of the image. The bottom one id the express card slot and the top one is the DVD connector. Remove the silver screws shown as circles in the image, and pull the PCBs laterally following the red arrows direction.
+[* black] Disconnect all 3 cables shown as red boxes on the image.
+[* black] Finally remove the speaker plastic holder (long black plastick marked in red at top of the image). Two silver screws have to be removed first (red circles in red area).

이미지 1

이전 이미지 없음

추가