#7단계의 변경 사항
편집자 Victoria Yates-
편집 승인됨 완료자 Victoria Yates
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Thread the shift cable back into the derailleur, pull it tight and tighten the anchor bolt so the cable flattens. Then find a bare stretch of cable and give it a good pull to make sure the cable is seated and has no slack. Then loosen the cable, pull it tight again and re-tighten it. |
|---|---|
| + | [* black] Now turn your bike upside down and change the gears. |
| + | [* black] While changing gears if you have to force them to change, the derailleur was put on incorrectly. The casing for your cables can break. |
| + | [* black] Run through the entire range of rear sprockets to make sure the chain does not rub on either side of the front derailleur cage. |