Universal Ceiling Fan Remote Replacement 단계 #7 기록

-	[* black] 1) Connect the lighting, motor, and AC in wires to the replacement remote receiver.
-	[* black] 2) Gently tug each wire connection and make sure it's properly terminated with the twist on connectors.
-	[* black] 3) Cut a 5-6 inch piece of electrical tape and wrap around the end of each wire.
-	[* icon_note] ~~TIP:~~ Attach electrical tape at the base of the wires first, then finish wrapping tape around the twist connector.
+	[* black] Connect the lighting, motor, and AC in wires to the replacement remote receiver.
+	[* black] Gently tug each wire connection and make sure it's properly terminated with the twist on connectors.
+	[* black] Cut a 5-6 inch piece of electrical tape and wrap around the end of each wire.
+	[* icon_note] Attach electrical tape at the base of the wires first, then finish wrapping tape around the twist connector.