#10단계의 변경 사항
편집자 Arthur Shi-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* icon_note] If your motherboard has a socket for a hard drive temperature sensor, follow this step to plug the sensor wires in. |
|---|---|
| + | [* black] Find a connector on the motherboard labeled ***HD TMP*** or ***HDD TEMP***. |
| + | [* icon_note] If you have trouble locating it, trace the two-wire temperature cable you disconnected from the old hard drive. |
| + | [* black] If the previous temperature cable is still connected to the board here, disconnect and remove it. You will no longer need it. |
| + | [* black] Connect the temperature sensor's two-wire red-black cable to the motherboard plug labeled ***HD TMP*** or ***HDD TEMP***. |
| + | [* icon_note] The connector is keyed to fit in one way only. If it seems like the connector is not fitting the socket, flip the connector and try again. |
| + | [* black] Route the excess wire so it does not interfere with any other components. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가
이미지 3
이전 이미지 없음
추가