#6단계의 변경 사항
편집자 Carsten Frauenheim-
편집 승인됨 완료자 Carsten Frauenheim
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [title] Remove the center chassis assembly | |
| [* icon_note] The center chassis is aligned to the shell with guide pegs. These pegs will need to slide out of their slots to allow the chassis to be lifted out. | |
| [* black] Grip the center chassis and pull it towards the top of the shell, uncoupling the guide pegs from the shell. | |
| [* black] Lift up the center chassis assembly to remove it from the shell. | |
| + | [* icon_reminder] During reassembly, make sure neither of the ribbon cables get pinched as you lower the center chassis into the shell. |