#1단계의 변경 사항
편집자 Sam Omiotek-
편집 승인됨 완료자 Sam Omiotek
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [title] Remove the trigger assemblies | |
| - | [* red] Use a Phillips #00 screwdriver to remove the four 6.4 mm screws securing the trigger assemblies to the midframe. |
| - | [* icon_note] If only one trigger assembly needs to be replaced, then only remove the screws for that one. |
| + | [* black] Flip over the midframe and motherboard. |
| + | [* red] Use a Phillips screwdriver to remove the four 6.4 mm screws securing the trigger assemblies to the midframe. |
| + | [* icon_note] If only one trigger assembly needs to be replaced, only remove the screws for that one. |