#2단계의 변경 사항
편집자 Wayne Roberts-
편집 승인됨 완료자 Wayne Roberts
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [title] Remove All Existing Solder from the Previous Switch Insert |
|---|---|
| + | [* black] Insert your soldering iron tip inside the hole and use the pump from the other side to remove all of the solder. |
| + | [* black] Unfortunately, I didn't take pictures of this process, however, this is where the desoldering pump becomes a necessity. The new switches will need ample room to be inserted in the holes, so you'll have to make sure there is no remaining solder in them. |