#4단계의 변경 사항
단계 라인
| + | [* black] After the screw in the stand slot is removed there are clips holding the display to the body of the system. |
|---|---|
| + | [* black] Using a prying tool such as an iFixit metal spudger or Jimmy tool you can lift the display from the body |
| + | [* black] Don’t worry about accidentally striking the components as they are pretty far away except for the bottom since the speakers are there. |
| + | [* black] One last thing before going to the other step. I highly don’t recommend using something such as a big flat head screw driver, butter knife, or sharp knifes. But if you must you can use them. |
이미지 1
이전 이미지 없음
추가
이미지 2
이전 이미지 없음
추가
이미지 3
이전 이미지 없음
추가