#5단계의 변경 사항
편집자 Benjamin Doron-
편집 승인됨 완료자 Benjamin Doron
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Release the SATA hard drive connector and USB flex cable from the board. | |
| - | [* icon_note] Removing the SATA connector |
| - | [* icon_note] |
| + | [* icon_note] Removing the SATA connector is optional if the battery screw seems easily accessible. |
| + | [* icon_note] If the battery screw must be more accessible, consider releasing the SD card board connector and removing the SATA hard drive. |
| [* black] Release the USB connector from the breakout board. | |
| [* icon_note] This USB cable is attached to the original battery. Remove and reattach to the replacement battery, if necessary. |