#5단계의 변경 사항
편집자 Andrew Federico-
편집 승인됨 완료자 Andrew Federico
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* |
|---|---|
| + | [* red] Release the SATA hard drive and USB ZIF connectors from the board. |
| [* icon_note] Removing the SATA connector is optional only if the battery screw is not easily accessible. | |
| [* icon_note] If the battery screw isn't more accessible, consider also releasing the SD card board ZIF connector and removing the SATA hard drive. | |
| - | [* |
| + | [* red] Release the USB ZIF connector from the breakout board. |
| [* icon_note] This USB cable is attached to the original battery. Remove and reattach to the replacement battery, if necessary. |