#6단계의 변경 사항
단계 라인
| + | [title] Take out the motor and length-adjustment-assembly |
|---|---|
| + | [* black] The assembly is held in place by one Torx T8 screw, identical to those from step 3. |
| + | [* black] The ring of the length-adjustment-assembly can slide down. A little pin-and-spring will fall out - don't loose it! It is used to make the "clicking" feedback when rotating the ring. |
| + | [* black] I did not disassemble this assembly any further. |
이미지 1
이전 이미지 없음
추가