#1단계의 변경 사항
편집자 Robert Wagner-
편집 승인됨 완료자 Robert Wagner
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] At this point, your optical drive assembly should be separate from your GameCube (picture 1). | |
| - | [* red] Flip the optical drive assembly over and remove 6 Phillips #1 screws as shown. |
| - | [* yellow] |
| + | [* red] Flip the optical drive assembly over and remove the 6 Phillips #1 screws as shown. |
| + | [* yellow] After the screws are removed, gently lift and remove the metal plate. Be careful not to disturb the brown ribbon cable. |